VERICOM-Smart metering solution
via SubGHz Radio Mesh-Network
VERICOM - Smart Metering Solution via battery-operated, self-healing mesh-network technology.
VERICOM radio mesh-network is an independent, proven and interoperable smart metering solution based on fully bi-directional, battery-operated SubGHz radio infrastructure, built to collect data from all meters and measurement devices from all medias (such as: electricity, gas, water, heat and cooling).
VERICOM radio nodes are “meter independent” and communicate with different meter makes and meter types.
Customer success story
...our customer's success stories...
Less water wasted and optimization of heat energy
in public buildings with a combination of new ultrasonic heat/water meters and VERICOM Smart metering solution can save costumers money.
A constant monitoring of consumption and latest state of metering technology is an investment, which grants the possibility for optimization of water and heat networks.
Alongside with the possibility of immediate leakage-detection, such an investment on long-term leads to less water wasted and lower costs.
“If the return temperature can be lowered by just one or two degree, the customers will have a saving of several euros a year” The new installed ultrasonic water and heat meters are more accurate than “old” mechanical meters and additionally real meter index can be read remotely. Directly from headquarter the intervals of reading can be changed remotely from 5 minute reading, up to hourly or daily readings of the specific meters. With smaller reading intervals the network can be monitored easily.
If there is a problem (leakage, pipe burst, etc) within the water or heat network the reading intervals will be set to 5 minutes reading intervals and due to that fact, the location of leakage can be found easily.
“With VERICOM – radio smart metering solution, not only 280 meters are read automatically remotely, but we do have more time for more customer-oriented activities, because we do not have to read meters manually or by sending letters and by evaluating these letters or by lengthy searching of locations of possible pipe bursts” the metering department is delighted with the investment in new ultrasonic meters combined with VERICOM wireless metering solution.
How it works?
Functionality of mesh-network technology.
VERICOM mesh-network is based on bi-directional communication technology receiving and forwarding data and operating independently from one another. Each radio node can act as an independent router within the network.
If a meter (VERICOM radio node) is removed, the network will automatically re-route the data communication. When added to a network, a meter (radio node) will automatically be activated and help with the routing process.
A mesh-network is self-healing, regardless of disruptions in communication routes, the network automatically maintains a high and stable performance no matter how many radio nodes are added, removed or repositioned within the mesh-network. The mesh-network is considered to be very reliable because it works with several communication paths between source and destination address.
With a few components and dynamic routing, the wireless mesh-network is quick and easy to use and more cost-effective than other communication systems. The communication paths in a wireless mesh-network overcome the physical boundaries of a traditionally wired system such as PLC (powerline communication), which increases the range even in harsh environments.
In standard operation VERICOM radio nodes read out the meter at the full hour (in real-time) and transmit this meter index/values immediately to the VERICOM data-concentrator. From VERICOM data-concentrator all collected data of VERICOM radio mesh-network nodes are transmitted via cellular/mobile (3G-UMTS / 4G-LTE) communication to customer's IT-system.
VERICOM radio nodes are based in license free SubGHz-ISM-bandwidth and operate with ultra-low power energy management for several years with a single lithium battery. The range in urban areas is up to 1500 meters in rural areas up to 5000 meters (30 dB / 1 Watt radio output power). Nevertheless each VERICOM wireless radio node is automatically - due to its mesh-network functionality - a distance extender.
VERICOM radio communication is reliable safe, each communication telegram is encrypted by advanced encryption standard AES-128.
How to connect to external device (meter) ?
VERICOM mesh-network solution is meter independent, therefor each radio node is able to read-out any implemented meter make or meter type.
VERICOM solution does offer lots of hardware interfaces to connect to external devices, such as:
- pulses / S0 / reed-contact
- absolute encoder SCR/SCR+
- grey-code encoder
- M-BUS Master
- M-BUS Slave
- M-BUS (TTL)
- serial communication RS232
- serial communication RS485
- analogue signal (0-3/10V;0-20mA)
- temperaturesensor PT 1000
- optical OCR-/scan-interface
- proprietary hardware & protocol
meters in operation:
Natural Gas meter:
- ELSTER: Absolute Encoder
- DRESSER: GreyCode Encoder
- FLONIDAN: Uniflo, GXS, GreyCode
- ITRON / ACTARIS: "e"-series
- DIEHL/HYDROMETER: Swiss meter
- VERAUT: UGSM Ultrasonic meter
- Various meters with reed-contact
- Landis&Gyr: Ultraheat 50, Ultraheat XS
- DIEHL/HYDROMETER: Sharky
- KAMSTRUP/RKG: Multical 401,
- Multical 601
- ENGELMANN SensoStar 2
- VERAUT: UHM Ultrasonic meter
- DIEHL/HYDROMETER: Flypper
- SENSUS: Dynamic Hybrid, Residia,
- Householdmeter 620
- ENGELMANN WaterStar
- VERAUT: USWM Ultrasonic meter
- Various meters with reed-contact
- ELSTER: AS3000: RS485
- ECHELON (PLC)
- ISKRA (PLC)
- AMIS/SIEMENS (PLC)
- GLOBAL TRONICS: RS232
- KAMSTRUP 382: RS232
- meters with interfaces such as:
- (pulse, LED, RS232/485, M-BUS)
Get in Touch
VERAUT - Verfahrens- und Automationstechnik Ges.m.b.H.
Derfflingerstr.14 / C / 3
A-4020 Linz / Austria
+43 732 386361-0
+43 732 386361-20
Write us ...
Please complete the form fields below and we will contact you shortly.